I read an article on this in our Sunday papers - looked it up online and found this - interesting, what do you think? Zante

he identity and origin of tiny, potentially hazardous particles emitted from common laser printers have been revealed by a new study at Queensland University of Technology.

Sponsored Links (Ads by Google)

HP Toner and Inks
Genuine HP Authorised Reseller All HP models
superstore.hpdesignjets.com

Which Inkjet Printer Won?
The latest models tested by CHOICE. Join today for the full report.
www.choice.com.au/inkjetprinters

Professor Lidia Morawska from QUT's International Laboratory for Air Quality and Health lead the study to answer questions raised by earlier findings that almost one third of popular laser printers emitted large numbers of ultrafine particles.

These tiny particles are potentially dangerous to human health because they can penetrate deep into the lungs.

Professor Morawska said the latest study found that the ultrafine particles formed from vapours produced when the printed image is fused to the paper.

"In the printing process, toner is melted and when it is hot, certain compounds evaporate and those vapours then nucleate or condense in the air, forming ultrafine particles." she said

"The material is the result of the condensation of organic compounds which originate from both the paper and hot toner."

The study compared a high emitting printer with a low emitting printer and found that there were two ways in which printers contributed to the formation of these particles.

"The hotter the printer gets, the higher the likelihood of these particles forming, but the rate of change of the temperature also contributes," Professor Morawska said.

"The high emitting printer operated at a lower average temperature, but had rapid changes in temperature, which resulted in more condensable vapour being emitted from the printer.

"The printer with better temperature control emitted fewer particles"

Professor Morawska said this research provided information which would help consumers better understand the risks of laser printers and would help the printer industry to design low or no emission printers.

More information: An Investigation into the Characteristics and Formation Mechanisms of Particles Originating from the Operation of Laser Printers, Environ. Sci. Technol., Article ASAP, DOI: 10.1021/es802193n, http://pubs.acs.org/doi/abs/10.1021/es802193n

Source: Queensland University of Technology

Relevant stories

* Do laser printers emit harmful particles?
created Dec 02, 2008 | popularity not rated yet | comments no comments yet (PhysOrg.com) -- Researchers have investigated the possibility that laser printers emit pathogenic toner particles into the air, which has been a subject of public controversy. Some reports have suggested ...
* Particle emissions from laser printers might pose health concern
created Jul 31, 2007 | popularity not rated yet | comments no comments yet Certain laser printers used in offices and homes release tiny particles of toner-like material into the air that people can inhale deep into lungs where they may pose a health hazard, scientists are reporting. Their study ...
* Magnetic particles act as ink in new printer
created Mar 16, 2007 | popularity not rated yet | comments no comments yet By using a laser beam to focus and push particles against a substrate, scientist Lars Helseth of Nanyang Technological University in Singapore has designed and built a unique type of colloidal printer. Taking ...
* Cheaper Color Printing by Harnessing Ben Franklin's Electrostatic Forces
created Nov 13, 2006 | popularity not rated yet | comments no comments yet Recent advances in the basic science of electrostatics could soon lead to color laser printers that are cheaper and up to 70 percent smaller than current models, a physicist reports at this week's AVS International Symposium ...
* Reducing Our Lead Footprint: Engineers Discover New Material to Reduce Lead in Electronics
created Nov 19, 2008 | popularity not rated yet | comments no comments yet (PhysOrg.com) -- Researchers at the University of Maryland's A. James Clark School of Engineering have discovered a new lead-free material, bismuth samarium ferrite (BSFO), for use in products ranging from ...


Tags

laser printers, particles, organic compounds, queensland university of technology, printing process, human health

I would have thought that, if this was the case, it would similarly apply to photocopiers which use the same technology of fusing toner particles on to the paper. However, perhaps we should now adopt the practice of wearing a face mask whenever printing with a Laser printer.

I think if we worried about everything that might be bad for us Mike we would be dead from the stress of the worry! Nevertheless it is interesting and your comment on the photocopiers has merit as well (most of us have multifunction centres now anyway. Zante.